Image may not reflect selected features
Advanced Micro Instruments Liquid Rejection Probe, Regulator
The LRP is designed to prevent liquid slugs from reaching your analyzer and includes a direct coupled NeSSI-compliant regulator.
This LRP contains a unique membrane and stainless-steel disk combination that blocks liquids and particulates from passing, allowing only gases to reach the Analyzer. When liquid slugs occur, the LRP automatically shuts off gas until it passes. Once the liquid slug clears, liquid drains back into the pipeline and the LRP resumes gas flow to the Analyzer. When the pipeline pressure exceeds the inlet pressure rating of the Analyzer, the regulator can be adjusted to bring the sample pressure down to 0-25psi (0–1.7 bar). Maximum inlet pressure of 1500psi (103 bar) and a flow rate of 5 SCFH.